TorqueSequence: 9 5 1 3 7. 8 4 2 6 10. (front of car) In 2 steps: 1. 22 lb-ft. 2. 60 lb-ft (according to 94-97 manual), 63 lb-ft (according to 98-01 manual) ARP Head Studs. With ARP head studs, most people add a step to the end of the OEM torque steps at about 10 lb-ft or so above the last OEM torque spec, rounded up.
2010Honda Accord 4dr V6 Auto EX-L Specs #5 out of 18 in 2010 Affordable Midsize Cars. Review; Photos; Cars for Sale; Configurations; Reliability; V6 Cylinder Engine: Engine Type: Gas V6: Displacement: 3.5L/213: Horsepower (Net @ RPM) 271 @ 6200: Front Head Air Bag: Rear Head Air Bag: Front Side Air Bag: Brakes. 4-Wheel ABS: 4-Wheel
Torquecylinder head bolts on a Honda Accord. By EricTheCarGuy. 9/15/10 11:45 AM. Cylinder head bolts are big, strong
HondaAccord 2.4 i-VTEC EX (man. 6 speed) as offered for the year 2010 for Europe U.K. The Horspower / Torque Curve below was generated by the ProfessCars™ software, 1 Using a six inch wobble plus extension friction ball and shallow socket following the torque sequence (Fig. 1), loosen one bolt at a time to 0 torque and then torque that same head bolt to 60 Ft-lbs. 2) Repeat step 4 for every head bolt one bolt at a time in sequence. 3) Verify that each head bolt is at 60 Ft-lbs before performing next steps. TheToyota 2.7-liter engine produces 159 horsepower and 180 foot-pounds of torque. It's the base engine of the Tacoma and the 4Runner. The cylinder head and engine block of the Toyota 2.7-liter engine are joined together by head bolts with a gasket sealing the joint. The head bolts must be tightened to the correct ENz9. 251 25 97 45 287 222 198 395 41

2010 honda accord 2.4 cylinder head torque specs